Tuesday, October 25, 2011

How do you change the headlight in a citroen C3?

Really How? Cant get to it from anywhere?!
How do you change the headlight in a citroen C3?
one of those nightmare jobs google ' c3 change headlight' and there's a few ideas there.



http://www.howtomendit.com/answers.php?i鈥?/a>
How do you change the headlight in a citroen C3?
You will have to remove some parts which are in the way in the engine bay to get to the back of the headlamp unit
I had a Citroen C4 and had massive difficulty changing bulbs. Look for any plastic coverings that can be removed to help access. They normally clip off easily. You then have to reach inside to unclip the bulb holder.
  • web page host
  • dynamic editing
  • How do i change a headlight on a toyota emina?(estima) and is it difficult?

    i have bought a new headlight for my car (toyota emina) estima p reg) as my old one has gone cloudy and will be a mot failure, how do i change it over and is it really difficult to do?
    How do i change a headlight on a toyota emina?(estima) and is it difficult?
    It's really a super easy project. I'd suggest getting a specific Toyota manual for your car. Pick up a Haynes or Chilton's repair manual from NAPA, Carquest, Auto Zone or Advance Auto for step by step instructions. Your public library may have one of the two manuals or better yet a Motors Manual. The entire plastic headlight bucket can be removed without changing the aiming adjustment. Then the plastic headlight has been removed it's easy to change the bulb or the plastic aiming bucket.



    All you need is a few metric sockets, short 3/8 extensions and a 3/8 ratchet.

    How do change the Headlight Switch in a !993 GMC Sierra 1500?

    I have a 1993 GMC Sierra Single cab and it takes me about 15 minutes to get my panel lights to work. The headlights turn on just fine but they mph and rpms do not light up? If i went to Autozone and picked up a new switch how would i go about replacing it?
    How do change the Headlight Switch in a !993 GMC Sierra 1500?
    Take the screws out of the plastic panel that goes around the light switch, speedometer etc in front of the driver. The switch is mounted on the back of that panel.............md

    How do I change the headlight and brakelights on a 92 buick skylark GS?

    http://www.analogstereo.com/pdf/om/1993s鈥?/a>



    here ya go, its the online owners manual.

    How Do I change The headlight Bulbs on a 2007 Honda Civic?

    Actually you cant see them like post above me says.



    The passenger side low beam is easier if you go from inside the wheel well.

    The driver side low beam is best accessed by removing the battery.



    It is a real pain if you have large hands, if you have little hands it will still be uncomfortable, but much easier.
    How Do I change The headlight Bulbs on a 2007 Honda Civic?
    the bulbs can be accessed behind the light itself. open the hood and you can see it.
    How Do I change The headlight Bulbs on a 2007 Honda Civic?
    Buy the correct headlight bulb replacement.



    1. Turn off your headlights if it's not already off.

    2. Open your hood, and pull the wire harness behind the headlight.

    3. Pull and slip out the rubber cover seal.

    4. Reach in and unlatch the clip that holds the bulb socket.

    5. Remove the bulb socket and replace the old bulb with your new bulb replacement.



    Work your way backwards and return the bulb socket, relatch the clip, return the rubber cover seal, and reconnect the wire harness.



    Good luck!
    Its in ur manual. Turn engine off and turn the wheel all the way to right for you left light. Right under the fender remove the plastic using a flat head screwdriver and you can easily reach up and take out the light bulb, but make sure u dont touch the bulb itself. For the right light turn ur wheel all the way to left and do the same thing u did on the right. U dont have to take out the battery or anything. Just remove the plastic carefully under the fender with a flat head. Dont break the clips tho. Dont belive me? Look it up in your manual.

    How Do I change The headlight Bulbs on a 2007 Honda Civic?

    I just did this. The low beams take 9006, the high beams are 9005. On the Drivers Side -- Loosen the battery anchor bolts to move the battery an inch and pull up the coolant overflow bottle (no tools on the bottle, battery takes 10mm deep socket). Change either or both bulbs that way. Bulbs have clip connectors (squeeze to remove) and a 1/4 turn retaining ring. Lefty loosey, Righty tighty.



    The passenger side is another story. You can change the high beam easily by just reaching for it from above. The anti lock brake module is in the way of reaching the low beam from above -- do not attempt to remove it(anti lock brake module). Remove the Two most forward speed clips on the plastic inner fender on the passenger side at the fender lip. Pull back and reach up to change the Low Beam Bulb. Having a person as a %26quot;spotter%26quot; from above will help immensely.



    Do not touch the %26quot;glass%26quot; on the new bulb. Your skin oil will cause a hot spot and blow the new bulb.



    This is hardly a beginner job (passenger side). Your dealer will probably replace the bulb for you, at no cost if you bring a new bulb to the shop. Ours where I live does this service at no charge.



    EDIT: Obviously Helper has never changed a bulb on a new style Civic.

    Gio -- The coolant bottle is on the Drivers side -- that is the LEFT side of the car. It used to be on the right side pre-2006
    How Do I change The headlight Bulbs on a 2007 Honda Civic?
    Get new bulb. Replace old bulb. Don't get finger oil on new bulb.



    ==

    If you can't figure this much out, car repair is really NOT something for you.





    Good Luck
    How Do I change The headlight Bulbs on a 2007 Honda Civic?
    High beams/day light running lights are one set of bulbs, and the low beams are another.



    Depending on how thin your arms are, the lights are accessable from underneath the hood; however, on the right side, you'll have to slide the coolent container out of the way. Otherwise, you will have to take your wheels off and access the lights through the wheel well.



    Once you get access to the light area, you gotta twist on the harness, then it should pop out, then you can replace the bulbs.



    If you need to know which bulb size you have.. go here http://www.sylvania.com/ConsumerProducts鈥?/a>
    Take it to a Honda dealer
  • How do i make a quilt
  • database
  • How to change a headlight on a 2003 Ford Ranger?

    Open hood

    Unplug headlamp

    Rotate lock-ring counter-clockwise to release lock ring

    Pull headlamp capsule out

    Insert new 9007 headlamp capsule, being sure to not touch the glass with your fingers. If it is contaminated, clean with alcohol. A fingerprint will create a hot-spot and crack the glass.

    When you re-install the lamp, be sure to fully seat the lamp. The o-ring will have some resistance.

    Re-install the lock ring

    Plug in the plug.
    How to change a headlight on a 2003 Ford Ranger?
    Its not real hard, if you must most auto zones will assist for free, just ask.